Savana 1/2 Ton Van V8-5.7L VIN R (2001)
Fuel Tank Unit: Service and Repair
Fill Valve Filter Replacement
REMOVAL PROCEDURE
1. Remove the O-ring (1).
2. Remove the circlip (2).
3. Remove the fill valve filter (3).
4. Clean the filter in solvent.
5. Blow dry the filter using compressed air.
6. Be sure that the filter passages are clear. Replace the filter if needed.
INSTALLATION PROCEDURE
1. Install the till valve filter (3).
2. Install the circlip (2).
3. Install the O-ring (1).