Savana 1/2 Ton Van V8-5.7L VIN R (2001)
3. Install the till line fitting (3) to the fill valve using a new O-ring. Lubricate the O-ring with petroleum jelly or equivalent before installation.
Tighten
Tighten the till line fitting to 37 N.m (27 lb ft).
4. Install the fill valve cover (2) to the mounting cup (1).
5. Connect the negative battery cable.
6. Prime the CNG fuel system by cycling the ignition ON and OFF several times.
7. Start the engine and use the J 41416 in order to inspect for CNG fuel system leaks at each serviced fitting.
Fuel Sender Assembly Replacement
FUEL SENDER ASSEMBLY REPLACEMENT
REMOVAL PROCEDURE
CAUTION: Refer to Battery Disconnect Caution in Service Precautions.