Savana 1/2 Ton Van V8-5.7L VIN R (2001)
1. Route the hose in the same position the hose occupied prior to removal.
2. Smoothly route the hose in order to avoid sharp bends and kinking.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the power brake booster outlet hose (1) to the power brake booster (2).
-
Tighten the hose fitting to 27 Nm (20 ft. lbs.).
4. Install the power steering outlet hose (1) to the steering gear (2).
5. Check the power steering fluid level. Refer to Checking and Adding Power Steering Fluid.
6. Remove the drain pan from under the vehicle.
7. Bleed the power steering system.
