Savana 1/2 Ton Van V8-5.7L VIN R (2001)
Control Arm Bushing: Service and Repair
Upper Control Arm Bushings Replacement
-
Tools Required
-
J 9519-E Ball Joint Remover/Installer Set
Removal Procedure
Caution: Refer to Vehicle Lifting Caution in Service Precautions.
1. Raise the vehicle.
Caution: Refer to Floor Jack Caution in Service Precautions.
2. Support the vehicle with suitable safety stands.
3. Support the lower control arm with safety stands.
4. Remove the tire and wheel assembly.
5. Remove the upper control arm from the vehicle.
6. Using the J 9519-17 as shown remove the upper control arm bushings from the control arm.
Remove the tool.
Installation Procedure