Savana 1/2 Ton Van V8-5.7L VIN R (2001)
Flex Plate: Service and Repair
Flywheel to Torque Converter Bolt Replacement
Flywheel to Torque Converter Bolt Replacement
Removal Procedure
1. Raise the vehicle. Refer to Vehicle Lifting.
2. For all engines except the 4.3L engine, remove the access cover located at the bottom of the transmission bell housing.
3. For vehicles equipped with a 4.3L engine, remove the bolts securing the starter cover to the transmission.
Important: Mark the alignment of the flywheel and the converter in order to retain a proper balance.
4. Remove the flywheel to converter bolts.
Installation Procedure
