Savana 1500 RWD V6-4.3L (2007)
Fuel Pressure Test Port: Service and Repair
Fuel Pressure Service Valve Replacement
Removal Procedure
1. Remove the engine cover.
2. Relieve the fuel system pressure. Refer to Fuel Pressure Relief (With CH 48027) Fuel Pressure Relief (Without CH 48027).
3. Use a standard valve core tool in order to remove the valve core (2).
Installation Procedure
1. Use a standard valve core tool in order to install a new valve core (2).
2. Tighten the fuel filler cap.
3. Connect the negative battery cable.
4. Inspect for leaks.
1. Turn ON the ignition for 2 seconds.
2. Turn OFF the ignition for 10 seconds.
3. Turn ON the ignition for 2 seconds.
4. Inspect for fuel leaks.
5. Install the fuel pressure connection valve cap (3).
6. Install the engine cover.
