Savana 2500 V6-4.3L VIN X (2005)
1. Turn ON the ignition for 2 seconds.
2. Turn OFF the ignition for 10 seconds.
3. Turn ON the ignition.
4. Inspect for fuel leaks.
10. Install the engine cover.
Fuel Hose/Pipes Replacement - Filter to Tank (Side Tank)
FUEL HOSES/PIPES REPLACEMENT - FILTER TO TANK (SIDE TANK)
REMOVAL PROCEDURE
1. Disconnect the negative battery cable.
CAUTION: Refer to Battery Disconnect Caution in Service Precautions.
2. Relieve the fuel system pressure. Refer to Fuel Pressure Relief Procedure.
3. Drain the fuel tank. Refer to Fuel Tank Draining Procedure.
4. Remove the fuel tank.
5. Disconnect the fuel feed pipe at the fuel filter.
6. Disconnect the chassis fuel return pipe (4) at the rear fuel return pipe (2).
7. Remove the fuel pipe retaining clips (1).
8. Remove the fuel feed and return pipes.
INSTALLATION PROCEDURE
1. Install the fuel feed and return pipes and the fuel pipe retaining clips (1).
