Savana 2500 V8-6.6L DSL Turbo (2008)
1. Align the body side upper (1,2) garnish molding clips to the holes in the body.
2. Push in on the body side upper (1,2) garnish molding to engage the clips.
Notice: Refer to Fastener Notice.
3. Install screw and close cover, if equipped with roof rail inflatable restraints.
Tighten the screws to 2 N.m(18 lb in).
Body Side Protector Replacement
Body Side Protector Replacement
Removal Procedure
1. Remove the retainers from the body side protectors.
2. Remove the driver side body side front protector from the vehicle.
3. Remove the driver side body side rear protector from the vehicle.