Savana 2500 V8-6.6L DSL Turbo (2008)
7. Install the heater pipe to the engine retaining nut.
Tighten the nut to 8 N.m (71 lb in).
8. Install the heater hose to the heater pipe assembly near the front of the engine.
9. Reposition the heater hose clamp at the heater pipe assembly using J 38185.
10. Install the upper fan shroud.
11. Install the air cleaner.
12. Fill the cooling system. Refer to Cooling System Draining and Filling (Static Fill) Cooling System Draining and Filling (Vac N Fill).
13. Install the engine cover.
Heater Inlet Hose Replacement (6.6L)
Heater Inlet Hose Replacement (6.6L)
Special Tools