Savana 2500 V8-6.6L DSL Turbo (2008)
Valve Cover: Service and Repair
Valve Rocker Arm Cover Replacement - Lower Left Side (LMM)
Valve Rocker Arm Cover Replacement - Lower Left Side (LMM) (6.6L)
Removal Procedure
1. Remove the air conditioning (A/C) compressor and power steering pump bracket. Refer to Compressor Mounting Bracket Replacement .
2. Remove the upper left valve rocker arm cover. Refer to Valve Rocker Arm Cover Replacement - Upper Left Side (See: Valve Rocker Arm Cover
Replacement - Upper Left Side) .
3. Remove the glow plug nuts.
4. Remove the engine wire harness at glow plugs.
5. Remove the fuel injectors. Refer to Fuel Injector Replacement (Left) Fuel Injector Replacement (Right) .
6. Remove the fuel injectors return hose clamp at the left rear of engine (1).
7. Remove the fuel feed and return line clamp bolt.
8. Remove the lower valve rocker arm cover bolts.
9. Remove the lower valve rocker arm cover.
10. Remove the gasket from the lower valve rocker arm cover.
11. Inspect the lower valve rocker arm cover gasket for damage, replace if necessary. Otherwise reuse the old gasket.
Installation Procedure