Savana 2500 V8-6.6L DSL Turbo (2008)
5. Install the engine mount to engine bolts.
Tighten the bolts to 58 N.m (43 lb ft).
6. Using the adjustable jack lower the engine until the mount rests on the bracket.
7. Install the engine mount to engine mount bracket bolts.
Tighten the bolts to 65 N.m (48 lb ft).
8. Install the starter. Refer to Starter Motor Replacement (4.3L) Starter Motor Replacement (4.8L, 5.3L, and 6.0L) Starter Motor Replacement
(6.6L) .
9. Position the transmission oil cooler lines.
10. Connect the transmission oil cooler lines at the transmission. Refer to Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting Disconnection
and Connection .
11. Lower the vehicle.