Savana 2500 V8-6.6L DSL Turbo (2008)
8. Install the intake manifold tube bolts (2, 4) and nut (1).
Tighten the bolt/nut to 25 N.m (18 lb ft).
9. Install the engine wiring harness clip bolt (3).
Tighten the bolt to 15 N.m (11 lb ft).
10. Install the engine wiring harness clip to the intake manifold tube.
11. Install the rear intake manifold tube nut (2).
Tighten the nut to 25 N.m (18 lb ft).
12. Install the 2 rear intake manifold tube bolts (3).
Tighten the bolt to 25 N.m (18 lb ft).