Savana 2500 V8-6.6L DSL Turbo (2008)
Heat Shield: Service and Repair
Exhaust Heat Shield Replacement - Body Panel
Exhaust Heat Shield Replacement - Body Panel
Tools Required
J 34940 Rivet Gun
Removal Procedure
1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Using a 1/4 inch (6 mm) drill bit, remove the rivets from the heat shields, as necessary.
3. Remove the exhaust tailpipe heat shield from the vehicle.
4. Remove the muffler heat shield.
5. Remove the front exhaust pipe heat shield.
Installation Procedure