Savana 2500 V8-6.6L DSL Turbo (2008)
5. Remove the compressor suction hose retaining nut (1).
6. Remove the compressor suction hose from the accumulator.
7. Remove the retaining screw (4) from the accumulator retaining bracket (2).
8. Remove the accumulator (1).
9. Remove the sealing washers.
Installation Procedure
1. If replacing the accumulator, add the specified amount of PAG oil directly into the accumulator. Refer to Refrigerant System Capacities.
2. Install the accumulator (1).
Notice: Refer to Fastener Notice.
3. Install the screw (4) to the accumulator retaining bracket (2).
Tighten the screw to 9 N.m (80 lb in).