Savana 2500 V8-6.6L DSL Turbo (2008)
Installation Procedure
1. Install the defrost actuator (2) to the heater assembly.
2. Connect the vacuum hose (1) to the defrost actuator (2).
3. Install the I/P upper trim pad.
Mode Actuator Replacement - Upper
Mode Actuator Replacement - Upper
Removal Procedure
1. Rotate the instrument panel (I/P) carrier out and downward. Refer to Instrument Panel Carrier Replacement.
2. Disconnect the vacuum hose from the upper mode actuator.
3. Release the tabs from the upper mode actuator.
4. Unhook the actuator from the upper mode door lever.
5. Remove the upper mode actuator.
Installation Procedure