Savana 2500 V8-6.6L DSL Turbo (2008)
1. Install the lower mode actuator.
2. Press lower mode actuator on until you hear tabs engage.
3. Install the I/P carrier.
Mode Valve Actuator Replacement - Auxiliary
Mode Valve Actuator Replacement - Auxiliary
Removal Procedure
1. Remove the heater assembly.
2. Remove the retaining screws from the auxiliary mode actuator.
3. Remove the auxiliary mode actuator.
Installation Procedure
1. Install the auxiliary mode actuator.
Notice: Refer to Fastener Notice.
2. Install the retaining screws to the auxiliary mode actuator.
Tighten the screws to 1.9 N.m (17 lb in).
3. Install the heater assembly.
Recirculation Actuator Replacement