Savana 2500 V8-6.6L DSL Turbo (2008)
J 38185 Hose Clamp Pliers
Removal Procedure
1. Remove the air cleaner assembly.
2. Drain the engine coolant. Refer to Cooling System Draining and Filling (Static Fill) Cooling System Draining and Filling (Vac N Fill).
3. Remove the upper fan shroud.
4. Remove the accumulator.
5. Reposition the heater inlet hose (2) clamp to the coolant bypass valve.
6. Remove the heater inlet hose (2) from the coolant bypass valve.
7. Reposition the heater inlet hose clamp to the engine.
8. Remove the heater inlet hose from the engine.
Installation Procedure