Savana 2500 V8-6.6L DSL Turbo (2008)
2. Install the EGR cooler hose (5) onto the EGR cooler tube and position the EGR cooler hose clamp (6).
3. Install NEW intake manifold tube gaskets (1) as required.
4. Position the EGR valve (3) to the EGR cooler tube (4).
5. Install the EGR valve to EGR cooler tube bolts (2).
Tighten the bolts to 20 N.m (15 lb ft).
6. Install a NEW gasket (1) to the EGR valve cooler tube assembly (2)
7. Install the EGR valve cooler tube assembly (2) to the engine.
8. Install the EGR valve/cooler tube assembly bolts and nut.
Tighten the bolts to 25 N.m (18 lb ft).
9. Install the EGR Valve Temperature sensors.
