Savana 2500 V8-6.6L DSL Turbo (2008)
Fuel Rail: Service and Repair
Fuel Injection Fuel Rail Assembly Replacement - Bank 2
Fuel Injection Fuel Rail Assembly Replacement - Bank 2
Removal Procedure
1. Remove the engine cover.
2. Remove the air conditioning (A/C) compressor.
3. Remove the left fuel rail fuel feed pipe.
4. Remove the right fuel rail fuel feed pipe.
5. Remove the left fuel injector feed pipes.
6. Disconnect the fuel rail temperature (FRT) sensor electrical connector.
7. Remove the fuel return pipe.
