Savana 2500 V8-6.6L DSL Turbo (2008)
7. Install the fuel line bracket bolt.
Tighten the bolts to 25 N.m (18 lb ft).
8. Connect the fuel feed and return pipes.
9. Install the intake manifold tube.
10. Install the charge air cooler inlet pipe.
11. Prime the fuel system. Refer to Fuel System Priming.
12. Start the engine.
If the engine does not start, repeat the above step.
13. Inspect the fuel system for fuel leaks.
14. Install the engine cover.
Fuel Hose/Pipes Replacement - Chassis
Fuel Hose/Pipes Replacement - Chassis
Removal Procedure
1. Remove the engine cover.
2. Disconnect the fuel feed and return lines.
3. Remove the fuel line bracket nut.
4. Remove the fuel line bracket from the stud.
