Savana 2500 V8-6.6L DSL Turbo (2008)
Fuel Filler Hose: Service and Repair
Fuel Tank Filler Hose Replacement
Removal Procedure
1. Drain the fuel below the fuel fill neck. Refer to Fuel Tank Draining.
2. Raise and support the vehicle. Refer to Vehicle Lifting.
3. Loosen the fuel fill hose clamps (1) at the tank and the filler neck.
4. Remove the fuel fill hose from the tank and filler neck.
5. Cap the fuel and vent holes in the fuel tank in order to prevent possible fuel system contamination.
Installation Procedure
1. Remove the caps from the fuel and vent holes in the fuel tank.
2. Install the fuel fill hose to the tank and filler neck.
