Savana 2500 V8-6.6L DSL Turbo (2008)
Shift Interlock Solenoid: Service and Repair
Automatic Transmission Shift Lock Actuator Replacement
Removal Procedure
Caution: Refer to SIR Caution .
1. Disable the SIR system. Refer to SIR Disabling and Enabling .
2. Put the shift lever clevis into the neutral position.
3. Remove the knee bolster. Refer to Driver Knee Bolster Replacement .
4. Disconnect the electrical connector.
5. Use a small screwdriver to pry the A/T shift lock control actuator away from the steering column jacket assembly and the cable shift cam
assembly.
6. Remove the A/T shift lock control actuator.
Installation Procedure