Savana 2500 V8-6.6L DSL Turbo (2008)
1. Install the power steering pump remote reservoir (3) to the vehicle.
Notice: Refer to Fastener Notice .
2. Install the power steering pump remote reservoir (4) mounting nuts.
Tighten the nuts to 11 N.m (97 lb in).
3. Install the reservoir inlet hose (3) to the reservoir.
4. Connect the reservoir outlet hose to the reservoir.
5. Bleed the power steering system. Refer to Power Steering System Bleeding (See: Power Steering Bleeding/Service and Repair) .