Savana 2500 V8-6.6L DSL Turbo VIN 6 (2007)
1. Install the sliding side door upper trim panel to the vehicle.
2. Align the tabs on the trim panel with the retainers on the door.
Press the trim panel into place.
Rear Side Door Upper Track Garnish Molding Replacement
Rear Side Door Upper Track Garnish Molding Replacement
Removal Procedure
1. Remove the center pillar upper garnish molding.
2. Remove the rear upper garnish molding.
3. Grasp and gently pull down on the sliding side door upper track garnish in order to disengage the retaining clips.
4. Remove the sliding side door upper track garnish from the vehicle.
5. Inspect the sliding side door upper track garnish for broken or missing retaining clips. Replace the retaining clips as needed.
Installation Procedure
1. Install the sliding side door upper track garnish to the vehicle.
2. Align the sliding side door upper track garnish into position.
3. Press the garnish in order to engage the retaining clips.
4. Install the rear upper garnish molding.
5. Install the center pillar upper garnish molding.
Rear Side 60/40 Door Trim Panel Replacement - Left Side (E26, 40 Door)