Savana 2500 V8-6.6L DSL Turbo VIN 6 (2007)
Wheel Speed Sensor: Service and Repair
Wheel Speed Sensor Replacement (2WD)
Wheel Speed Sensor Replacement (2WD)
Removal Procedure
Caution: Refer to Brake Dust Caution.
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the tire and wheel.
3. Remove the brake rotor (2) shown on the 1500 Series.
4. Remove the wheel speed sensor (WSS) cable mounting clip from the knuckle.
5. Remove the WSS cable mounting clip from the upper control arm.
6. Remove the WSS cable mounting clip from the frame attachment point.
7. Remove the WSS cable electrical connector.