Savana 2500 V8-6.6L DSL Turbo VIN 6 (2007)
1. Install NEW O-ring seals onto the oil level indicator tube.
2. Lightly lubricate the O-ring seals with engine oil.
3. Install the oil level indicator tube.
4. Install the starter motor.
Notice: Refer to Fastener Notice.
5. Install the oil level indicator tube bolt at the indicator tube bracket.
Tighten the bolt to 21 N.m (15 lb ft).
6. Install the surge tank. Refer to Surge Tank Replacement.
7. Install the oil level indicator.