Savana 2500 V8-6.6L DSL Turbo VIN 6 (2007)
2. Install the intake manifold.
3. Install the intake manifold bolts/nuts.
Left Side
Notice: Refer to Fastener Notice.
4. Tighten the intake manifold bolts/nuts.
Tighten the bolts/nuts in the sequence shown to 25 N.m (18 lb ft).
5. Install the fuel injector pump.
6. Install the left fuel rail. Refer to Fuel Injection Fuel Rail Assembly Replacement - Bank 2.
7. Install the auxiliary generator, if equipped.
8. Install the center intake manifold.