Savana 2500 V8-6.6L DSL Turbo VIN 6 (2007)
10. Remove the engine wiring harness clip bolt (1) at the rear of the intake manifold tube.
11. Remove the 2 rear intake manifold tube bolts (3).
12. Remove the rear intake manifold tube nut (2).
13. Remove the engine wiring harness clip from the intake manifold tube.
14. Remove the engine wiring harness clip bolt (3).
15. Remove the exhaust gas recirculation (EGR) cooler water pipe bracket bolt (5).
16. Remove the intake manifold tube bolts (2, 4) and nut (1).