Savana 2500 V8-6.6L DSL Turbo VIN 6 (2007)
![background image](/gmc/savana_2500/v8-6.6l_dsl_turbo_vin_6/Page-591019.png)
23. Remove the front intake manifold tube bolts, the front intake manifold tube, and the IAH.
Installation Procedure
1. If the intake manifold tube was replaced perform the following steps, otherwise proceed to step 5.
Notice: Refer to Fastener Notice.
2. Position the IAH and the front intake manifold tube to the intake manifold tube, install the front intake manifold tube bolts.
Tighten the bolts to 20 N.m (15 lb ft).