Savana 2500 V8-6.6L DSL Turbo VIN 6 (2007)
Turbocharger Vane Position Sensor: Service and Repair
Turbocharger Vane Position Sensor Replacement
Removal Procedure
1. Remove the engine cover.
Important: Note wire routing prior to removal.
2. Disconnect the turbocharger vane position sensor electrical connector.
3. Remove the turbocharger vane position sensor connector from the bracket on the LH valve cover.
4. Remove the turbocharger vane position sensor thermal reflective shield/tape.
5. Remove the turbocharger vane position sensor from the turbocharger.