Savana 2500 V8-6.6L DSL Turbo VIN 6 (2007)
10. Connect the EGR cooler hose fitting (2) to the heater inlet pipe.
11. Install the heater inlet pipe bracket bolt (1).
Tighten the bolt to 25 N.m (18 lb ft).
12. Fill the cooling system. Refer to Draining and Filling Cooling System (Static Fill) Draining and Filling Cooling System (Vac N Fill).
13. Install the crankcase ventilation hose/pipe.
14. Install the right exhaust pipe.
15. Install the intake manifold tube.
16. Install the generator.