gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

ABOUT US
Fuel Feed Pipe and Return Pipe Purging|Page 10570 > < Fuel Feed Pipe and Return Pipe Purging|Page 10565

Savana 2500 V8-6.6L DSL Turbo VIN 6 (2007)

Page 1
background image

Fuel Supply Line: Service and Repair
Fuel Feed Pipe and Return Pipe Purging

Fuel Feed Pipe and Return Pipe Purging

1. Pump the primer located on top of the fuel filter 30 times or until stiff.
2. Attempt to start and run the engine. If the engine does not start, repeat step 1.
3. Allow to run for 5 minutes at idle.
4. Check for fuel leaks.
5. Clear all engine diagnostic trouble codes (DTCs).

Fuel Feed Pipe and Return Pipe Purging|Page 10570 > < Fuel Feed Pipe and Return Pipe Purging|Page 10565