Savana 2500 V8-6.6L DSL Turbo VIN 6 (2007)
7.
Add a slot to the mounting bracket as shown. The slot should be perpendicular to the current slot. The length of the slot should be 17 mm (0.669
in) with a width of 8 mm (0.315 in).
8.
Install the fuel filter mounting bracket into position on the frame and loosely install the bolts. Slide the slotted side full forward and tighten the
bolt. Tighten the other bolt.
Tighten
Tighten the bolts to 25 N.m (18 lb ft).
9.
Bend the mounting bracket tab down over the frame.
10.
Install both fuel filters to the mounting bracket.
Tighten
Tighten the bolts to 10 N.m (89 lb in).
11.
Install the fuel cooler assembly.
12.
The clearance between the filter and the tank should now be around 12 mm (0.472 in).
Warranty Information
For vehicles repaired under warranty, use the table.
Disclaimer