Savana 2500 V8-6.6L DSL Turbo VIN 6 (2007)
8. Remove the positive extension cable nut from the UBEC terminal stud.
9. Remove the positive extension cable.
Installation Procedure
1. Position the positive extension cable and connect the wiring harness clips.
Notice: Refer to Fastener Notice.
2. Position the positive extension cable to the UBEC terminal stud and install the nut.
Tighten the positive extension cable to UBEC terminal stud to 9 N.m (80 lb in).
3. Install the battery positive cover to the UBEC.
4. Position the positive extension cable to the intake air heater and install the nut.
