Savana 2500 V8-6.6L DSL Turbo VIN 6 (2007)
Steering Shaft: Service and Repair
Intermediate Steering Shaft Seal Replacement
Intermediate Steering Shaft Seal Replacement
Tools Required
J 42640 Steering Column Anti-Rotation Pin
Removal Procedure
Notice: The wheels of the vehicle must be straight ahead and the steering column in the LOCK position before disconnecting the steering column
or intermediate shaft from the steering gear. Failure to do so will cause the SIR coil assembly to become uncentered, which may cause damage to
the coil assembly.
1. Install the J 42640 in the steering column lower access hole.
2. Remove the intermediate shaft bearing.
3. Remove the intermediate shaft seal (1) from the intermediate shaft bearing (2).
Installation Procedure
1. Install the intermediate shaft seal (1) to the intermediate shaft bearing (2).
