Savana 2500 V8-6.6L DSL Turbo VIN 6 (2007)
Tie Rod: Service and Repair
Steering Linkage (Non-Rack & Pinion)
Steering Linkage Inner Tie Rod Replacement
Tools Required
J 34028 Inner Tie Rod Wrench
Removal Procedure
1. Raise and suitable support the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Remove the tire and wheel.
3. Remove the outer tie rod.
4. Loosen the inner tie rod to relay rod retaining nut using J 34028 .
5. Remove the inner tie rod to the relay rod retaining nut. Discard old nut.
6. Remove the inner tie rod from the vehicle
7. Inspect the shaft for bent or damaged threads.
8. Clean the tapered surface of the steering knuckle.
Installation Procedure