Savana 2500 2WD V6-4.3L VIN X (2004)
1. Slide the module (3) into the mounting bracket (1).
2. Push the module (3) towards the mounting bracket (1) at the end near the tab (2).
Push until the module (3) is seated in the mounting bracket (1).
3. Install the module and bracket (2) to the I/P.
NOTE: Refer to Fastener Notice in Service Precautions.
4. Install the bolts (3).
Tighten
Tighten the bolts (3) to 3 N.m (27 lb in).
5. Connect the coaxial cable and the electrical connectors (2) to the module.
6. Install the drivers knee bolster.