Savana 2500 AWD V8-5.3L VIN T (2004)
6. Remove the retaining screw (4) from the accumulator retaining bracket (2).
7. Remove the accumulator (1).
8. Remove the sealing washers.
INSTALLATION PROCEDURE
1. If replacing the accumulator add the specified amount of PAG oil directly into the accumulator. Refer to Refrigerant System Capacities.
2. Install the accumulator (1).
NOTE: Refer to Fastener Notice in Service Precautions.
3. Install the screw (4) to the accumulator retaining bracket (2).
Tighten
Tighten the screw to 9 N.m (80 lb in).
