Savana 2500 AWD V8-5.3L VIN T (2004)
Tighten the retaining bolt to 11 N.m (97 lb in).
3. Install the front door window to the door from the outside of the vehicle.
4. Install the nuts (3) in order to retain the front door window to the sash.
Tighten the retaining nuts to 11 N.m (97 lb in).
Important: Before raising or lowering the front door window ensure that the front door window is properly aligned in the rear run
channel.
5. Lower the front door window.
6. Install the front run channel (1) to the door.
7. Install the bolt (2) in order to retain the front run channel (1) to the door.
Tighten the retaining bolt to 11 N.m (97 lb in).
8. Install the inner window sealing strip. Refer to Sealing Strip Replacement - Front Door Upper (See: Body and Frame/Doors, Hood and
Trunk/Doors/Front Door/Front Door Weatherstrip/Service and Repair/Sealing Strip Replacement - Front Door Upper).
9. Install the outer window sealing strip. Refer to Sealing Strip Replacement - Outer Belt (See: Body and Frame/Doors, Hood and Trunk/Doors/Rear
Door/Rear Door Weatherstrip/Service and Repair/Sealing Strip Replacement - Outer Belt).
10. Install the front door water deflector. Refer to Water Deflector Replacement - Front Door See: Body and Frame/Doors, Hood and
Trunk/Doors/Front Door/Front Door Panel/Service and Repair.
11. Install the front door rear garnish. Refer to Garnish Molding Replacement - Front Door Rear (See: Body and Frame/Interior Moulding / Trim/Trim
Panel/Service and Repair/Garnish Molding Replacement - Front Door Rear).
12. Install the front door trim panel. Refer to Trim Panel Replacement - Side Front Door (See: Body and Frame/Doors, Hood and Trunk/Doors/Front
Door/Front Door Panel/Service and Repair).