Savana 3/4 Ton Van V6-4.3L VIN W (1998)
Engine Block Heater: Service and Repair
Coolant Heater Cord Replacement
REMOVAL PROCEDURE
1. Remove the engine cover.
2. Remove the bolt (2) retaining the cord clip (3) to the bracket (1).
3. Remove the cord clip (3) from the bracket (1).
4. Remove the bolt (2) retaining the bracket (1) to the engine block.
5. Remove the bracket (1) from the engine block.
6. Remove the cord (6) from the vehicle.
INSTALLATION PROCEDURE
IMPORTANT: Do not touch the heater cord to the following areas:
^
The engine
^
Hot pipes
^
The manifold
^
Any moving parts