Savana 3/4 Ton Van V6-4.3L VIN X (2003)
7. Remove the right knee bolster bracket.
8. Remove the CPA from the I/P module yellow 4-way connector (1) located behind the I/P support.
9. Disconnect the I/P module yellow 4-way connector (1).
10. Remove the CPA from the RF seat belt pretensioner (1) yellow 2-way connector (3) located under the passenger seat.
11. Disconnect the RF seat belt pretensioner (1) yellow 2-way connector (3).
12. Remove the CPA from the LF seat belt pretensioner (1) yellow 2-way connector (3) located under the driver seat.
13. Disconnect the LF seat belt pretensioner (1) yellow 2-way connector (3).
Zone 9