Savana 3/4 Ton Van V6-4.3L VIN X (2003)
4. Remove the engine mount to engine mounting bolts.
5. Remove the engine mount.
Installation Procedure
1. Install the engine mount to the vehicle.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the engine mount to engine mounting bolts.
^
Tighten the engine mount to engine bolts to 50 Nm (37 ft. lbs.).
3. Lower the engine.
4. Install the engine mount to frame mounting bolts.
^
Tighten the engine mount to frame bolts to 60 Nm (44 ft. lbs.).
5. Lower the vehicle.
