Savana 3/4 Ton Van V6-4.3L VIN X (2003)
21. Install the upper intake.
22. Install the accelerator control cable bracket, studs, and nuts to the intake manifold and the throttle body.
^
Tighten the accelerator control cable bracket nuts and studs to 12 Nm (106 inch lbs.).
23. Install the water pump inlet hose to the intake manifold.
24. Install the heater hoses.
25. Install the radiator inlet hose to the water outlet.
26. Connect the following electrical connectors:
^
The fuel meter body assembly connector (1)
^
The evaporative emission (EVAP) canister purge solenoid valve (2)
^
The manifold absolute pressure (MAP) sensor (3)
^
The A/C high pressure switch (4), if equipped.