Savana 3/4 Ton Van V6-4.3L VIN X (2003)
2. Install the MAP sensor, if removed.
3. Install the PCV valve cover, if removed. using the following procedure:
3.1.
Install a NEW seal (O-ring) on the PCV valve cover.
3.2.
Lubricate the seal with clean engine oil.
3.3.
Install the PCV valve cover in the upper intake manifold.
3.4.
Turn and lock the PCV valve cover in position.
4. Install the power brake booster vacuum tube fitting, if removed, using the following procedure:
4.
Install a NEW seal (O-ring) on the power brake booster vacuum tube fitting.
4.2.
Lubricate the seal with clean engine oil.
4.3.
Install the power brake booster vacuum tube fitting in the upper intake manifold.
4.4.
Turn and lock the power brake booster vacuum tube fitting In position.
5. Install a NEW seal on the fuel meter bodily assembly.
6. Lubricate the seal with clean engine oil.
