Savana 3/4 Ton Van V6-4.3L VIN X (2003)
Hose/Line HVAC: Service and Repair
Discharge Hose Replacement
DISCHARGE HOSE REPLACEMENT
TOOLS REQUIRED
J 39400-A Halogen Leak Detector
REMOVAL PROCEDURE
1. Recover the refrigerant. Refer to Refrigerant Recovery and Recharging.
2. Remove the coolant recovery reservoir.
3. Remove the grille.
4. Remove the discharge line nut (2) from the condenser.
5. Raise the vehicle. Refer to Vehicle Lifting.
6. Remove the discharge line bolt from the compressor.
7. Lower the vehicle.
8. Remove the discharge line from the vehicle.
INSTALLATION PROCEDURE
1. Install the discharge hose into the vehicle.
2. Install the discharge hose nut (2) to the condenser.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the nut to 16 N.m (12 lb ft).