gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Fuel Hose/Pipes Assembly Replacement|Page 3769 > < Fuel Hose/Pipes Assembly Replacement|Page 3767
Page 3
background image

6. Disconnect the chassis fuel return pipe (4) at the rear fuel return pipe (2).

7. Remove the fuel pipe retaining clips (1).
8. Remove the fuel feed and return pipes.

INSTALLATION PROCEDURE

1. Install the fuel feed and return pipes and the fuel pipe retaining clips (1).

NOTE:  Refer to Fastener Notice in Service Precautions.

Tighten
Tighten the bolts to 12 N.m (106 lb in).

2. Connect the chassis fuel return pipe to the rear fuel return pipe.
3. Connect the fuel feed pipe to the fuel filter.
4. Install the fuel tank.
5. Lower the vehicle.

Fuel Hose/Pipes Assembly Replacement|Page 3769 > < Fuel Hose/Pipes Assembly Replacement|Page 3767