Savana 3/4 Ton Van V6-4.3L VIN X (2003)
8. Remove the retaining bolt from the rear fuel pipe bracket.
9. Pull straight up on the fuel pipes in order to remove the fuel pipes from the injector assembly.
10. Remove the O-ring seals from both ends of the fuel feed and return pipes.
11. Discard the O-ring seals.
INSTALLATION PROCEDURE
1. Assemble the new O-rings into the inlet and outlet of the fuel injector assembly.
2. Apply a few drops of clean engine oil to the male tube ends.
CAUTION: Always apply a few drops of clean engine oil to the male pipe ends before connecting the fuel pipe fittings in order to reduce the