gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Front Steering Knuckle > < Center Link|Service and Repair|Page 7025
Page 4
background image

5. Install the inner tie rods to the relay rod.

6. Install the inner tie rods to relay rod retaining nuts.

7. Tighten the inner tie rods to relay rod retaining nuts using J34028.

Tighten the nuts to 112 Nm (83 ft. lbs.). 

8. Lower the vehicle.
9. Verify the wheel alignment.

Front Steering Knuckle > < Center Link|Service and Repair|Page 7025