gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Power Steering Pulley Replacement|Page 7256 > < Power Steering Pulley Replacement|Page 7254
Page 2
background image

7. Disconnect the power brake booster inlet hose (2) from the power steering pump (1) through the wheel well.
8. Cap the ends of the hose and the power steering pump in order to prevent the entrance of dirt.
9. Lower the vehicle.

10. Remove the power steering pump mounting bolts and the nuts.

11. Remove the accessory mounting bracket mounting bolts and nut
12. Pull the accessory bracket forward.
13. Remove the power steering pump from the vehicle.

Power Steering Pulley Replacement|Page 7256 > < Power Steering Pulley Replacement|Page 7254