Savana 3/4 Ton Van V8-305 5.0L VIN M SFI (2001)
Wheel Fastener: Service and Repair
Front
Wheel Stud Replacement
^
Tools Required
-
J 9746-02 Wheel Bearing Remover
Removal Procedure
Caution: Refer to Vehicle Lifting Caution in Service Precautions.
1. Raise the vehicle.
Caution: Refer to Floor Jack Caution in Service Precautions.
2. Support the vehicle with suitable safety stands.
3. Remove the tire and wheel assembly.
Notice: Refer to Brake Caliper Notice in Service Precautions.
4. Remove the front brake caliper.
5. Remove the hub/rotor.
Important: Do not damage the wheel mounting surface on the hub/rotor flange. Support the hub/rotor using the J 9746-02 and the press bars.
6. Remove the wheel stud using a press.
Installation Procedure
1. Install the wheel hub stud in the rotor where the old stud was removed.
2. Place 4 washers and a nut on the stud.
